Bantam e-STATION 301 DX Charger
 |
Specification: | |
| Operating Voltage: | DC 11-18 Volts | |
| LiPo: | 1-5 Series | |
| NiCd/MH: | 1-14 Series | |
| Pb: | 2-12 V | |
| Charge Current: | 0.1 to 5.0 A | |
| Discharge Current: | 0.1 to 1.0 A | |
| No. of Cycle: | 1 to 5 times | |
| Weight: | 350g | |
| Dimensions: | 113x80x28mm | |
The Bantam e-STATION 301 DX has an easy to operate program, where all of the basic factors are optimised and pre-programmed for maximum safety. The 301DX also employes a high-quality aluminium outer-case that is durable and efficient to cool out the internal heat. It also employs a circuit that has a maximum output power of 50W. As a result it can charge up to 14 cells of NiCd/NiMH and 5 Series Li-Poly batteries with a maximum current of 5.0A. The 301DX also has reverse polarity protection on both the input and output for maximum safety as well as safety checks to the input voltage and self-protection for short-circuits during the operation. The 301DX also performs 1 to 5 cyclic charging/discharging cycles for battery refreshing and balancing.
| User's Setting-Up Parameters: | |
|
Battery temperature cut-off
|
20 to 80C or OFF
|
|
Integral Timer Limit For Safety
|
10 to 720 min of OFF
|
|
Maximum Charging Capacity Limit For Safety
|
10 to 9990mAh or OFF
|
|
Key beep and buzzer sound
|
ON/OFF
|
|
Input power low alert
|
10 to 11V
|
|
LCD Backlight brightness
|
10 to 100%
|
Temperature Sensor - The processor monitors the temperature of the battery being charged or discharged during the process. For safety reasons the charger can stop the process at high temperature using your user parameters.
Further product information on pricing and instruction manual - CLICK HERE!